manualshive.com logo in svg

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 2 / 316

Share
Download
Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 2

EPA 

E

NERGY 

S

TAR ® (MFD)

The United States Environmental Protection Agency (EPA) has introduced a voluntary program, the 

E

NERGY 

S

TAR program, to encourage the widespread and voluntary use of energy-efficient technologies that enhance 

the workplace, improve product performance and prevent pollution. As an 

E

NERGY 

S

TAR Partner, the TOSHIBA 

TEC CORPORATION has determined that this copier model meets the 

E

NERGY 

S

TAR guidelines for energy 

efficiency.

E

NERGY 

S

TAR guidelines for this class of copier require 

E

NERGY 

S

TAR copiers to have a ‘Sleep Mode’ 

feature that automatically makes the copier enter the sleep mode after a period of inactivity. The copier must also 
automatically change to a ‘Low Power Mode’ (Automatic Energy Save) after a period of time since the last usage.
Specifically, this copier complies with the following requirements.

e-STUDIO200L/230/280 Copier model (Base model)
‘Automatic Energy Save’-

The copier consumes less than 93.55 watts (e-STUDIO200L/230)/112.80 watts (e-STUDIO280) during
Energy Save.

‘Automatic Energy Save’ Default Time-

The default time for the ‘Automatic Energy Save’ is 15 minutes.

‘Sleep Mode’

The copier consumes less than 15 watts (e-STUDIO230/280) in the ‘Sleep Mode’.

‘Sleep Mode’ Default Time-

The default time for the ‘Sleep Mode’ is 60 minutes (e-STUDIO230/280).

‘Off Mode’

The copier consumes less than 5 watts (e-STUDIO200L).

‘Off Mode’ Default Time-

The default time for the ‘Off Mode’ is 30 minutes (e-STUDIO200L).

e-STUDIO230/280 Copier/P Fax model (Multifunction model)
‘Automatic Energy Save’-

The copier consumes less than 138.55 watts (e-STUDIO200L/230)/157.80 watts (e-STUDIO280) during
Energy Save.

‘Automatic Energy Save’ Default Time-

The default time for the ‘Automatic Energy Save’ is 15 minutes.

‘Sleep Mode’

The copier consumes less than 70 watts (e-STUDIO200L)/80 watts (e-STUDIO230)/95 watts (e-
STUDIO280) in the ‘Sleep Mode’.

‘Sleep Mode’ Default Time-

The default time for the ‘Sleep Mode’ is 30 minutes (e-STUDIO200L)/60 minutes (e-STUDIO230/280).

Note1-

The default setting for the ‘Sleep Mode’ and ‘Automatic Energy Save’ can be changed.

Note2-

For Multifunction model, if the Fax or printer data is received in the sleep mode, the copier starts 
warming itself up and prints out the data when it becomes ready. Also, when the start button or the 
energy saver button on the control panel is pressed, the copier starts warming itself up.

Note3-

If ‘Automatic Energy Save’ and ‘Sleep Mode’ have the same setting time, ‘Sleep Mode’ takes priority.

In accordance with EPA 

E

NERGY 

S

TAR program guidelines, Toshiba recommends the following recycled paper.

Great White MultiUse 20 paper
Great White MultiUse 24 paper
If you have any questions regarding the use of recycled paper or some recommended types of recycled paper, 
please contact your authorized Toshiba dealer.

E

NERGY 

S

TAR is a U.S. registered mark.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Reviews:

No comments