manualshive.com logo in svg

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 11 / 316

Share
Download
Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 11

9

PREFACE

Thank you for purchasing the Toshiba Multifunctional Digital Systems e-STUDIO200L/230/280. This 
Operator’s Manual describes the following:
- How to use the Multifunctional Digital Systems.
- How to inspect and carry out maintenance on the Multifunctional Digital Systems.
- How to remedy mechanical and copying problems.

Before using the Multifunctional Digital Systems, thoroughly read and understand this Operator’s Manual. 
To ensure that clean copies are made at all times and to keep your Multifunctional Digital Systems in 
optimum working order, this Operator’s Manual should be readily available for future reference.

To ensure correct and safe use of the Toshiba Multifunctional Digital Systems e-STUDIO200L/230/280, 
this Operator’s Manual describes safety precautions according to the following three levels of warning:

Before reading this Operator’s Manual, you should fully understand the meaning and importance of these 
signal words.

-

Warning

Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or 
serious damage, or fire in the equipment or surrounding assets.

-

Caution

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, 
partial damage of the equipment or surrounding assets, or loss of data.

-

Note

Indicates a procedure you should follow to ensure the optimal performance of the Multifunctional Digital 
Systems and problem-free copying.

-

Tip

Describes handy information that is useful to know when operating the Multifunctional Digital Systems.

-

Advice

Describes an operation you should follow to keep the Multifunctional Digital Systems in good working 
order.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Reviews:

No comments