Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 54

Page: 54 / 316

2.HOW TO MAKE COPIES

2.SETTING ORIGINALS (Cont.)

When Placing an Original on the Glass

Sheet Originals

Raise the original cover or the reversing
automatic document feeder (optional),
and place the original face down on the
glass.

- Raise it 60 degrees or more for detecting the original.
- A: Original

Align the original against the left rear
corner of the glass.

Lower the original cover or the reversing
automatic document feeder (optional)
slowly.

- When copying originals with high transparency, such as OHP

films and tracing paper, place a blank sheet of paper, the size of
the original or larger, over the original.
- A: Original
- B: Blank sheet

(A)

(B)

(A)

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews:

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 54 / 316

Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews: