Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 292

Page: 292 / 316

290

13.MAINTENANCE

2.SIMPLE TROUBLESHOOTING (Cont.)

Images are Stained

Images are Blurred

Items to be checked

Countermeasure

Reference page

Is the original cover or the
optional reversing automatic
document feeder firmly closed?

Close the cover or the feeder
properly to shut out any outer
light.

"When Placing an Original on the
Glass"

Page 52

Are the original glass, the
original cover and the scanning
area dirty?

Clean them up.

"Weekly Maintenance"

Page 286

Is the image density set
properly?

Adjust the image density
properly with the [AUTO] button
or manual density buttons.

"6.COPY DENSITY ADJUSTMENT"

Page 102

Are 2-sided originals used?

As the other side of the originals
can be seen, adjust the image
density properly (lighter) with the
background adjustment
function.

"1.BACKGROUND ADJUSTMENT"

Page 104

Are originals with high
transparency used?

Place a blank sheet of paper
with originals of the same size or
larger over the original.

"When Placing an Original on the
Glass"

Page 52

Items to be checked

Countermeasure

Reference page

Does the entire originals lie
properly on the surface of the
glass?

Place the original on the glass or
the reversing automatic
document feeder and close the
original cover firmly.

Is the paper moist?

Replace it with new paper.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews:

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 292 / 316

Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews: