Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 120

Page: 120 / 316

118

5.USING THE EDITING FUNCTIONS

6.MAGAZINE SORT (FROM THE EDITING MENU) (Cont.)

Press the [EDIT] button to enter the edit
menu, and then press the [MAGAZINE
SORT] button.

Adjust the binding margin, and then press
the [ENTER] button.

- The default width of the margin is 2 mm (0.08”).
- To adjust the width, press the [2 mm] or [30 mm] button to select

the desired number, then press the [ENTER] button.

- If the optional finisher equipped with the saddle stitch is installed,

copied paper can be automatically stapled along their center line.
Press the [STAPLE ON] button to staple it.

- Maximum number of sheets that can be stapled. "Available

Conditions for Saddle Stitch"

Page 93

Select other copy modes as required.

Press the [START] button.

- When placing an original on the glass, follow steps 5 to 6 on

"Copying Procedure"

Page 48 continuously.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews:

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 120 / 316

Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews: