Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 111

Page: 111 / 316

109

Adjust the width of binding margin, and
then press the [ENTER] button.

- The default width of the margin is 7 mm (0.276”).
- To adjust the width, press the [0 mm] or [30 mm] button to select

the desired number, and then press the [ENTER] button.

- In duplex copying, margins on the back are created on the other

side of those in the front.
"4.DUPLEX COPYING"

Page 95

Select other copy modes as required.

Press the [START] button.

Creating a Bookbinding Margin

When Book Margin is selected, use it in conjunction with the Duplex Copying mode from book-type originals
("5. Book-type Originals to 2-Sided Copies"

Page 99).

Acceptable paper size for this function are LT, A4 and B5 only.

Press the [EDIT] button to enter the edit
menu, and then press the [IMAGE SHIFT]
button.

Press the [BOOK] button.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews:

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 111 / 316

Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews: