manualshive.com logo in svg

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 61 / 316

Share
Download
Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 61

59

2

4. INTERRUPT COPYING

While multi-copying is in progress, you can interrupt and make copies from different originals.

* The following modes cannot be used with interrupt copying:
- Cover sheet copying
- Sheet insertion copying
- Scan to e-filing/Save as file

1

Press the [INTERRUPT] button.

- “Job interrupted job 1 saved” appears.
- Interrupt copying is available while copying is in progress.

When “Auto Start” is displayed, you cannot make interrupt copying.

2

Replace the original with a new one. 

- "2.SETTING ORIGINALS" 

 

 Page 51

z

Select other copy modes as required.

3

Press the [START] button.

4

After you have finished interrupt copying, 
press the [INTERRUPT] button again.

- “READY to resume job 1” appears.

Without performing step 4, the interrupt copying mode will 
automatically be cancelled by the automatic function clear and the 
previously interrupted copy job will resume in a certain period of time 
after the interrupt copying has finished.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Reviews:

No comments