Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 122

Page: 122 / 316

120

5.USING THE EDITING FUNCTIONS

7.IMAGE EDITING (Cont.)

Place an original on the glass to specify
the area.

- Set the original face up with the bottom toward you, fit its top left

corner against the top left corner of the glass, and align it with the
original scale.

Using the original scale on the left and the
inner (top) scale, read the position of the
desired area as follows:

- X1 Distance from the top left to the left edge of the specified area.
- X2 Distance from the top left to the right edge of the specified

area.

- Y1 Distance from the top left to the upper edge of the specified

area.

- Y2 Distance from the top left to the lower edge of the specified

area.

4 rectangular areas can be specified on an original.

Enter the distance values read in step 5
for the specified area.

- Key in the value for X1 with the digital keys and press the [SET]

button.

- Similarly, set the values for X2, Y1 and Y2.
- When setting X1, X2, Y1, Y2 the display changes for entering the

next edit area.

Press the [ENTER] button.

Place the original(s).

- "2.SETTING ORIGINALS"

Page 51

- Place the original(s) on the glass with its face down, with its

bottom toward you, with its top left aligned against the original
scale on the left side.

Select other copy modes as required.

Press the [START] button.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews:

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 122 / 316

Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews: