manualshive.com logo in svg

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 182 / 316

Share
Download
Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 182

180

8.INTERNET FAX

2.SENDING INTERNET FAX (Cont.)

8

5

Specify the recipient.

- To continuously enter E-mail address after having specified them 

by means of entering directly, press the [MULTI] button, and then 
enter the next address. You do not need to press the [MULTI] 
button for the address book or the group entry.

- The selected destinations can be confirmed by selecting the 

[DESTINATION] button. "Confirming the Destinations" 

 

 Page 

180

- To cancel the other party’s address during the direct entry, press 

the [CLEAR] button on the control panel.

- To cancel the other party specified by the address or the group, 

press the highlighted button again. To cancel all specified 
recipient, press the [ALL CLEAR] button.

- To cancel the other party specified by the direct entry, press the 

[DESTINATION] button to enter the destination menu, and then 
cancel it. "Confirming the Destinations" 

 

 Page 180

6

Press the [START] button.

Confirming the Destinations

After specifying of the multiple destinations by such as Multi-address Transmitting, you can confirm these 
addresses in the list by pressing the [DESTINATION] button. Also, you can delete the addresses by 
pressing the [DELETE] button.

1

Press the [DESTINATION] button.

- 1 screen can show 8 destinations.
- To view destinations which are not displayed on the screen, press 

the [Prev] or [Next] button to scroll through the screens.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Reviews:

No comments