manualshive.com logo in svg

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 27 / 316

Share
Download
Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 27

25

1

Adjustment of the Angle of the Control Panel

When Adjusting the Angle of the Control Panel

The angle of the control panel is adjustable at any angle from 5 to 45 degrees from the horizontal position.

* When changing the angle of the control panel, be careful not to let your hands be caught in the gap 

between the equipment and the control panel. This could injure you.

When Fixing the Angle of the Control Panel

When you want to fix the angle of the control panel (at 7 degrees from the horizontal position), move the 
stopper attached on the backside of the control panel from the position (1) to (2).
Perform the following procedure to move the stopper.

1: The position where the angle is adjustable.
2: The position where the angle is fixed.

(2)

(1)

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Reviews:

No comments