manualshive.com logo in svg

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 135 / 316

Share
Download
Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 135

133

5

3

Press the [ENTER] button on the screen 
to set JOB BUILD.

4

After “Press START button to copy after 
changing settings.” appears, press the 
[BASIC] button.

5

On the Basic screen, set the copy mode, 
e-filing/file function, and finishing mode 
you want to use for the 1st job.

- Press the [SETTINGS] button to confirm the settings.
- To change the settings, press the [FC] button, and then start the 

procedure again from step 1.

Note that the settings for mixed sized originals, paper size to be 
copied, finishing mode (unselectable for mixed sized originals), 
image shift, book center erase, time & date stamp, page numbering, 
image direction in 2-sided copying, book <-> tablet, e-filing/file 
function cannot be changed for each job, from the 2nd job or later.

6

Press the [START] button.

- Scanning the originals of the 1st job starts.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Reviews:

No comments