Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 116

Page: 116 / 316

114

5.USING THE EDITING FUNCTIONS

4.DUAL-PAGE (Cont.)

Press the [BASIC] button to enter the
basic menu, and then select LT (A4, B5)
copy size.

Select other copy modes as required.

Place the first page(s) to be copied on the
glass, and then press the [START] button.

- If you do not copy your originals from the first page, the copies will

not be arranged in the same order as the original.

- Center the book on the yellow indicator line with the bottom

toward you. "Book-type Originals"

Page 53

Turn to the next page, set the book again,
and then press the [START] button.

- Repeat the above procedure until all the originals are finished

scanning.

After all the originals are finished
scanning, press the [FINISHED] button.

- Press the [COPY FINAL PAGE] button if the last original is 1-

sided page.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews:

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 116 / 316

Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews: