manualshive.com logo in svg

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 16 / 316

Share
Download
Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 16

14

GENERAL PRECAUTIONS (Cont.)

When Using the Multifunctional Digital Systems

Warning

- DO NOT place metallic objects or containers with water (flower vases, coffee cups, etc.) on or near the 

multifunctional digital systems. And keep paper clips and staples away from the air vent. This could cause 
a fire or give you an electric shock.

- If the multifunctional digital systems becomes excessively hot, smoke comes out of it or there is an odd 

smell or noise, proceed as follows.
Turn the main switch OFF and remove the plug from the outlet, then contact your service representative.

- If the multifunctional digital systems will not be used for more than one month, remove the plug from the 

outlet for safety purposes during that time.
This could cause a fire or give you an electric shock if an insulation failure occurs.

Caution

- DO NOT place heavy objects (8.82 lb. or more) on the original glass and do not press on it with force.

Breaking the glass could cause personal injury.

- DO NOT place heavy objects (8.82 lb. or more) on the multifunctional digital systems. If the objects fall 

off, this could cause injury.

- DO NOT remove or connect the plug with wet hands, as this could give you an electric shock.
- DO NOT touch the fuser unit and the metal area around it. Since they are very hot, you could be burned 

or the shock could cause you to get your hand injured in the machine.

- When changing the angle of the control panel, be careful not to let your hands be caught in the gap 

between the equipment and the control panel. This could cause personal injury.

- Be careful not to let your fingers be caught when closing the drawer.

This could injure you.

- Be careful not to let your fingers be caught between the equipment and the finisher (optional).

This could injure you.

- Be careful not to let your fingers be caught between the equipment and the automatic duplexer.

This could injure you.

- DO NOT place 6.6 lb. or more of objects on an optional work table. Breaking the work table could cause 

personal injury.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Reviews:

No comments