manualshive.com logo in svg

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 154 / 316

Share
Download
Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 154

152

7.SCANNING THE IMAGES

7

2. SCAN TO e-FILING

In this function, the scanned original data can be stored in the e-Filing. You can scan up to 200 sheets of 
LT size per 1 job. During scanning, you can perform the SCAN TO FILE or the SCAN TO E-MAIL 
simultaneously, as required. After storing the original data, you can print it at any time.
To store the original data, you can specify the public box or one of user boxes. The public box is a pre-set 
box since the installation of the equipment, and it will be used to store documents that any user may need 
to work with. The user box is the one created by the user, and, if password is set, you need to enter the 
password correctly.
Before storing the original data in e-Filing, you need to set up the user boxes. For setting up the user boxes 
and printing the stored documents, see "2.SETTING UP BOX" 

 

 Page 223 and "5.PRINTING STORED 

DOCUMENT" 

 

 Page 228.

* It is recommended to back up the data on the equipment's hard disk to prevent loss of data. You can back 

it up with the client PC using the File Downloader. See the [e-Filing Guide] for details.

To use SCAN TO e-FILING function, ‘optional Printer kit and optional Scanner upgrade kit’, or ‘optional 
Printer/Scanner kit’ is required.

* To use this function for e-STUDIO200L, you need to install above options and the network interface card 

(optional).

You can also store the copied original data in the e-Filing using the copy operation. ("1.STORE TO e-
FILING" 

 

 Page 142) However, when you use the original data with the client PC via network, it is 

recommended to store the original data using the scanning operation explained here, rather than using the 
copy operation. 

1

Place the original(s).

- "2.SETTING ORIGINALS" 

 

 Page 51

- If there is not enough space in the hard disk, the number of 

originals that can be scanned may be restricted.

The reversing automatic document feeder (optional) enables 
consecutive scanning of more than one original.

2

Press the [SCAN] button on the control 
panel to enter the scan menu.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Reviews:

No comments