Toshiba e-STUDIO FASTstart 200L Operator'S Manual Download Page 238

Page: 238 / 316

236

11.TEMPLATE

2.RECALLING TEMPLATE (Cont.)

Confirm that “Updated the template
setting” is displayed on the screen.

Select other copy mode as required.

Press the [START] button.

When Recalling Template in the User Group

Place paper in the drawer(s).

- "4.SETTING COPY PAPER"

Page 35

Place the original(s).

- "2.SETTING ORIGINALS"

Page 51

Press the [TEMPLATE] button on the
control panel.

- Menu for recalling template is displayed.

The group registered the template you
want to recall.

- Switch to the applicable menu using the [prev] or the [Next]

button.

- To display the applicable menu immediately, key in the number of

the desired user group.

Key in the Password (5 digits) of the
selected group, and then press the
[ENTER] button.

- If the password has not been set at the group registration, skip

this procedure and go to step 6.

Summary of Contents for e-STUDIO FASTstart 200L





























































































































































































































































































































Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews:

Toshiba e-STUDIO FASTstart 200L, Operator'S Manual, Page: 238 / 316

Search results

Summary of Contents for e-STUDIO FASTstart 200L

Reviews: