Toshiba A90-0132, Service Manual

Page: 73 / 176

73
Control circuit configuration
Indoor units
(4) Switch positions at shipment from the factory
Switch No. Function Description Position at shipment
from factory
SW01 Indoor unit No. Group operation control set-up
Set-up 1: Master unit
2 to 16: Slave units
SW02 Network address set-up
For contents of address set-up, see the next page.
SW03 TA adjust
No. 1 ON Normal
No. 2 OFF Normal
SW06 Ceiling height
No. 1 OFF Normal
No. 2 OFF Normal
When height of ceiling exceeds 2.7 m set No. 1 to ON.
SW07 Central control
switching
ON Communication error
(Non relay)
OFF (Normal)
Communication OK
No. 2 OFF Normal
SW08 Indoor HP set-up Factory set
For contents of switch set-up, see section (5)
ON Address set-up by remote controller is
unavailable.
OFF Address set-up by remote controller is
available.
No. 7
No. 1
13