Toro Z Master 500 Series, Service Manual, Page: 87 / 168

5-16 Z Master 500 Gas Series Service Manual
5
ENGINE
Fig 213 DSC-2901
15. Remove the ground cables located on the lower left
side of the base of the engine (Fig. 213). One bolt
goes into the side of the engine block and the other
is the engine mounting bolt and nut.
Fig 212 DSC-2895
Fig 214 DSC-2903
14. Remove the blue wire from the starter solenoid (Fig.
212).
16. Disconnect the engine harness connector from the
main wiring harness (Fig. 214).
Fig 211 DSC-2894
13. Remove the 3 red wires located at the starter
solenoid (Fig. 211).