Toro Z Master 500 Series, Service Manual, Page: 58 / 168

4-9 Z Master 500 Gas Series Service Manual
4
9. Remove the front two wheel motor bolts, lock
washers, spacers, and nuts (Fig. 125).
Fig 125
DSC-3076
10. Swing the brake linkage forward out of the way of
the wheel motor. It may be necessary to loosen the
back two bolts to remove the spacers (Fig. 126).
Fig 126
DSC-3077
12. For service work on the wheel motor refer to the
Parker/Ross Service Manual, Form #492-4753.
Fig 127 DSC-3078
11. Remove the back two bolts, lock washers, spacers,
and nuts and remove the wheel motor from the
frame (Fig. 127).
HYDRAULIC SYSTEM
Note: As a reminder, prior to connecting the
hydraulic lines, the O-rings should be
replaced with new ones and lightly lubricated
with petroleum jelly.
Wheel Motor Installation