Toro Z Master 500 Series, Service Manual, Page: 149 / 168

7-12 Z Master 500 Gas Series Service Manual
7
MOWER DECKS/PTO
4. Install the rear and front chains to the mower deck
(Fig. 393).
Fig 393 DSC-2640
5. Remove the hitch pin on the lift handle and raise the
mower in the transport position.
6. Install a 4 x 4 wood block under the right side of the
mower deck.
7. Lower the mower deck down on the wood block.
8. Install the strut pin in the strut assembly. Install and
tighten the bolt and nut.
9. Install the rear and front lift chains to the mower.
10. Raise the mower deck and remove the wood block.
Fig 395 DSC-3145
12. Check and make sure the mower drive belt is in the
grooves of the two idler pulleys located under the
electric PTO clutch (Fig. 395).
Fig 394 DSC-3139
11. Install the belt around the electric PTO clutch pulley
(Fig. 394).
Note: Clutch guard removed for clarity.
A
B
A. Idler pulley B. Stationary idler