Toro Z Master 500 Series, Service Manual, Page: 49 / 168

3-22 Z Master 500 Gas Series Service Manual
3
CHASSIS
9. Remove the cotter pin and clevis pin through the
adjustable yoke for the neutral return bolt (Fig. 096).
10. Remove the two bolts and nuts that retain the flange
bearing on the inside of the motion control (Fig.
097).
Fig 096 DSC-2064
Fig 097 DSC-2066
11. Remove the two bolts and nuts that retain the flange
bearing on the outside of the motion control (Fig.
098).
12. Remove the motion control from the frame (Fig.
099).
Fig 098 DSC-2067
Fig 099 DSC-2068
Reverse the order of removal.
Motion Control Assembly Installation