Toro Z Master 500 Series, Service Manual, Page: 104 / 168

5-33 Z Master 500 Gas Series Service Manual
5
ENGINE
30. Turn the fuel shut-off valve to the OFF position.
31. Move the hose clamp and disconnect the fuel line on
top of the engine (Fig. 277).
Fig 277 DSC-2833
Fig 278 DSC-2836
32. Remove the 4 bolts and spring washers retaining
the engine to the frame. The engine mounting bolts
are located under the engine in tapped holes in the
engine block.
33. Remove the engine from the frame (Fig. 278).
A. Hose clamp B. Fuel line
B
A
27 HP Kawasaki Liquid-Cooled
Engine Installation
1. Lower the engine on to the frame. Install 4 bolts and
spring washers through the frame and into the base
of the engine. Tighten the bolts.
2. Connect the gas line on top of the engine and install
the hose clamp (Fig. 279).
Fig 279 DSC-2833
3. Turn the fuel shut-off valve to the ON position.
4. Reconnect the black and white wiring connector
located on the right front side of the engine (Fig.
280).
Fig 280 DSC-2832