Toro Z Master 500 Series, Service Manual, Page: 103 / 168

5-32 Z Master 500 Gas Series Service Manual
5
29. Unplug the black and white wiring connector from
the wiring harness located on the right front side of
the engine (Fig. 276).
Note: The other two wiring connectors do not need
to be disconnected.
Fig 276 DSC-2832
ENGINE
Fig 275 DSC-3164
28. Remove the 3 red wires from the starter solenoid
(Fig. 275).
Fig 274 DSC-3163
27. Unplug the orange/black wire to the starter solenoid
(Fig. 274).
26. Remove the three engine ground cables located on
the lower right rear of the engine (Fig. 273).
Fig 273 DSC-2829