TIGA P 901 PH, Instruction Manual

Page: 103 / 172

23
EN
ENGLISH
(Translation of the Original Instructions)
a . Place the machine on a flat surface.
b . Apply the parking brake .
c .
Turn off the engine.
d . Remove the key from the switch
(14:C) .
e . Remove the key from the main po-
wer switch (12:A) .
Authorized service workshops carry out gua-
ranteed repairs and maintenance. Always use
genuine spare parts.
Genuine STIGA SpA spare parts and
accessories were designed specifical -
ly for STIGA SpA machines . Please re-
member that non-genuine spare parts
and accessories have not been verified
or approved by STIGA SpA .
Use of non-genuine spare parts and ac-
cessories could have negative effects
on the operation and safety of the ma-
chine . STIGA SpA shall decline all liabil-
ity in the event of injuries or damages
caused by such parts .
Genuine spare parts are supplied by
authorized assistance workshops and
dealers .
It is advisable to send your machine
once a year to an authorized service
workshop for servicing, assistance and
safety device inspection .
11 STORAGE
1. Empty the fuel tank:
• Start the machine’s engine and leave it
running until it stops.
2. Thoroughly clean the whole machine. It is
particularly important to clean the bottom
side of the cutting mean assembly.
3. If the paintwork is damaged, touch it up to
prevent rust.
4. Place the machine in a covered, dry place.
Charge the battery before putting the
machine into storage . The battery can
be seriously damaged it if is put into
storage flat.
12 TERMS OF PURCHASE
The warranty covers all material and manufacturing
defects. The user must follow all the instructions
provided in the accompanying documentation.
The warranty does not cover damages caused by:
• failure to become familiar with the documenta-
tion accompanying the machine.
• carelessness.
• incorrect or prohibited use or assembly.
• use of non-genuine spare parts.
• use of accessories not supplied or approved by
STIGA SpA.
The warranty does not cover:
• normal wear and tear of consumables, such as
drive belts, headlights, wheels, bolts and wires.
• normal wear and tear
• engines. Engines are covered by the warranty
provided by the relative manufacturer in com-
pliance with the specified terms and conditions.
The purchaser is protected by his own national
legislation. The purchaser’s rights envisaged by
the national laws in his own country are not in any
way restricted by this warranty .