Thompson ViBE EM4000, User Manual

Page: 87 / 350

Chapter 4 ’Web Browser Interface’ — Settings
ViBE EM4000 — Release 1.10 75
User Manual — 46073586AB02
Editing an HD video component
Click add a component to select the shortcut menu and click Add Video
HD or the video component. The following page will be displayed:
Figure 4-26. Editing an HD video component - General page
This page is used to set general component parameters.
Source Used to select the video source to be encoded. Choice
between:
HD SDI : HD SDI input on the device rear panel.
Pattern : Pattern selected in the Default Pattern field
below.
Default Pattern Used to select the pattern that will be displayed if no
video component is present at Encoder input or if
Pattern has been selected in the Source field above.
Choice between Black Pattern or Bar Pattern .
Standard Used to select the video standard at Encoder input.
Choice between:
1080i and 720p .
Frequency Area Used to select the video field frequency at Encoder
input. Choice between
50 Hz and 59.94 Hz .
Format Only the 16:9 format is available.
Changing this parameter stops the outgoing
video signal for approximately 5 to 10
seconds.
Changing this parameter stops the outgoing
video signal for approximately 5 to 10
seconds.