Thompson ViBE EM4000, User Manual

Page: 150 / 350

Chapter 5 ’Servicing’ — Operations performed using the Local Console
138 ViBE EM4000 — Release 1.10
User Manual — 46073586AB02
Figure 5-32. Reading SNMP information - rinfo command
The following information will be displayed:
„ Location : sysLocation information
„
Contact : sysContact information
„ Name : sysName information
Writing SNMP agent information ( winfo )
To write SNMP agent Mib-2.system branch sysContact , sysName and
sysLocation information, type
winfo
after the ViBE prompt:
Figure 5-33. Writing SNMP agent sysContact, sysName and sysLocation information -
winfo command
The current information will be displayed.
Enter the following fields:
„ Location : sysLocation information
„ Contact : sysContact information
„ Name : sysName information
Displaying the list of community strings ( cread )
To display the list of community strings , type
cread
after the ViBE
prompt: