Thompson ViBE EM4000, User Manual

Page: 137 / 350

Chapter 5 ’Servicing’ — Operations performed using the Local Console
ViBE EM4000 — Release 1.10 125
User Manual — 46073586AB02
Figure 5-15. Displaying software option status - lsopt command
The following information will be displayed:
„ id : software option ID number
„ ref. : software option sales reference
„ nb : number of options installed
„ status : option status; installed indicates that the option has been
installed,
----- indicates that the option has not been installed
„ key : key used to install the option
„ comment : option name.
Ordering and installing software options
To order and install a software option, please observe the following
procedure:
1. Order the software option from Thomson Video Networks by
providing the equipment code
and the serial number of the Encoder;
2. Install the option using the key supplied by Thomson Video Networks.
Ordering a software option (eqcod) (drid)
1. Read the Encoder equipment code and Product serial number
Two methods are available:
™ via the Local Console
™
via a Web Browser
a. Reading the Encoder equipment code and Product serial
number via the Local Console
To read the Encoder equipment code, type
eqcod
after the ViBE
prompt: