Thompson ViBE EM4000, User Manual

Page: 124 / 350

Chapter 4 ’Web Browser Interface’ — Maintenance
112 ViBE EM4000 — Release 1.10
User Manual — 46073586AB02
1. Click Save Settings . The following page will be displayed:
Figure 4-64. Saving a configuration file to the hard drive 1/3
2. Click Active configuration .
3. If one of the following windows is displayed, click Save :
Figure 4-65. Saving a configuration file to the hard drive 2/3
The following window will be displayed:
Figure 4-66. Saving a configuration file to the hard drive 3/3
4. Select the destination directory for the file on the hard drive and enter
the file name.
5. Click Save . The file is saved on the hard drive.
Loading Encoder settings from a disk
The Load settings command is used to load a settings file from a hard
drive and to immediately apply it to the Encoder. This file may have been
created using the
Save settings command described above or the