Thompson ViBE EM4000, User Manual

Page: 45 / 350

Chapter 2 ’Installation and Startup’ — Performing the Initial Settings
ViBE EM4000 — Release 1.10 33
User Manual — 46073586AB02
It is possible to edit the characteristics of these Users and a maximum of
64 Users can be defined.
Adding a User (usradd)
To add a User, type usradd after the
ViBE
prompt:
Figure 2-16. Adding a Web Interface User - usradd command
Enter the following fields:
„
name : User name
„ password : password for accessing the Web Interface
„
confirm password : re-enter the password for accessing the Web
Interface
„
profile : enter the User profile. The available profiles are given just
above this field.
The following information will be displayed:
„ add xxxxxx as yyyyyyy : User xxxxxx with the profile yyyyyyy has
been successfully added.
If the operation is not successful, the reason for failure will be
displayed.
Deleting a User (usrdel)
To delete a User, type
usrdel
after the ViBE prompt:
guest guest guest (=operator)
Table 2-3. Users defined on device shipment
User name Password Profile