Thompson ViBE EM4000, User Manual

Page: 142 / 350

Chapter 5 ’Servicing’ — Operations performed using the Local Console
130 ViBE EM4000 — Release 1.10
User Manual — 46073586AB02
Figure 5-24. Displaying software license(s) - lsopt command
„ Ordering and installing software licenses
To order and install a software license, please observe the following
procedure:
1. Order the software license from Thomson Video Networks by
providing the
equipment code and the serial number of the Encoder
(refer to section ’Ordering a software option (eqcod) (drid)’ on
page 125);
2. Install the software license using the key supplied by
Thomson Video Networks (refer to section
’Installing a software
option (insopt)’ on page 127).
Software downloading
Downloading is used to upgrade device firmware. It can be performed
via the {Download} application supplied by Thomson Video Networks
Customer Service. The {Download} application is described in section
’Tools’ on page 143. The
view
,
down, uninst
and
togg
commands are
for factory use only.
Up to 5 software packages can be downloaded to the ViBE EM4000
memory via the {Download} application (1 active package and 4 inactive
packages).
Managing Web Interface Users
Foreword
The Encoder can be operated via a Web Browser connected to the Web
Interface featured on the device. Users accessing the Encoder via this
Interface must have been declared in the device. User declaration and
management (creation, deletion, password, rights, etc.) are performed
via the Local Console.
The term ’software package’ also refers to a software release.
Software license