Thompson ViBE EM4000, User Manual

Page: 230 / 350

Appendix C ’Regulatory Notices’ — VCCI Class A Warning
218 ViBE EM4000 — Release 1.10
User Manual — 46073586AB02
VCCI Class A Warning
Laser Compliance
Laser Safety Requirements
The device used in this product is a Class 1 certified laser product.
Operating this product outside specifications or altering from its original
design may result in hazardous radiation exposure, and may be
considered an act of modifying or new manufacturing of a laser product
under U.S. regulations contained in 21CFR Chapter 1, subchapter J or
CENELEC regulations in HD 482 S1. People performing such an act are
required by law to recertify and reidentify this product in accordance with
provisions of 21CFR subchapter J for distribution within the U.S.A., and
in accordance with CENELEC HD 482 S1 for distribution within countries
using the IEC 825 standard.
Laser Safety
Laser safety in the United States is regulated by the Center for Devices
and Radiological Health (CDRH). The laser safety regulations are
published in the “Laser Product Performance Standard,” Code of Federal
Regulation (CFR), Title 21, Subchapter J.
The International Electrotechnical Commission (IEC) Standard 825,
“Radiation of Laser Products, Equipment Classification, Requirements
and User’s Guide,” governs laser products outside the United States.
Europe and member nations of the European Free Trade Association fall
under the jurisdiction of the Comite European de Normalisation
Electrotechnique (CENELEC).
For the CDRH: The radiant power is detected through a 7 mm aperture at
a distance of 200 mm from the source focused through a lens with a focal
length of 100 mm.
For IEC compliance: The radiant power is detected through a 7 mm
aperture at a distance of 100 mm from the source focused through a lens
with a focal length of 100 mm.