Thompson ViBE EM4000, User Manual

Page: 178 / 350

Appendix A ’Technical Specifications’ — Interface Specifications
166 ViBE EM4000 — Release 1.10
User Manual — 46073586AB02
Output interfaces
Table A-9. ViBE EM4000 output connectors
Connector Description
IP OUT 1 & 2
„
Purpose:
Electrical Gigabit Ethernet interfaces for compressed A/V
output over IP.
„
Features:
™
Type: IEEE 802.3 1000-BaseT
™
Connector type: RJ45
™
110 Ohms line impedance
™
Standard: IEEE 8.2.3-2002
™
Bitrate: 10 Mbit/s, 100 Mbit/s, 1 Gbit/s (autosensing)
™
Operating mode: Half/Full duplex (autonegotiation)
™
A
utocrossover mechanism for cable connection
™
Cabling: two twisted pairs, category STP5 or FTP5, gauge
AWG 24
™
EMC and Security: according to IEEE 802.3-2002
™
Permissible output jitter: according to IEEE 802.3-2002
„
Pinout and indication:
Leds indicate Speed and Activity of the link
:
Led 2
Led 1
Pin number Name
1 TDP (Transmitted Data +)
2 TDN (Transmitted Data -)
3 RDP (Received Data +)
4, 5 Not connected
6 RDN (Received Data -)
7, 8 Not connected
Tx Rx Mode Led 1 Led 2
No link Off Off
100 Mbits/s Green Off
x 100 Mbits/s Flashing Green Off
x 100 Mbits/s Flashing Yellow Off
x x 100 Mbits/s Flashing Yellow Off
1 Gbits/s Green Green
x 1 Gbits/s Flashing Green Green
x 1 Gbits/s Flashing Yellow Green
x x 1 Gbits/s Flashing Yellow Green