Thompson ViBE EM4000, User Manual

Page: 46 / 350

Chapter 2 ’Installation and Startup’ — Performing the Initial Settings
34 ViBE EM4000 — Release 1.10
User Manual — 46073586AB02
Figure 2-17. Deleting a Web Interface User - usrdel command
Enter the following fields:
„ name : name of User to be deleted
The following information will be displayed:
remove xxxxx : User xxxxx has been successfully deleted.
If the operation is not successful, the reason for failure will be displayed.
Displaying the list of Users (usrlist)
To display the list of Users and their profiles, type
usrlist
after the ViBE
prompt:
Figure 2-18. Displaying the list of Web Interface Users - usrlist command
The following information will be displayed:
„
User : User name
„ Profile : User profile
Declaring Software options (if required)
If software options need to be installed, see the Servicing chapter to
install them using the Local Console.
If options are ordered with the product, they will have been installed
at the factory and will be immediately available to the operator.