Thompson ViBE EM4000, User Manual

Page: 140 / 350

Chapter 5 ’Servicing’ — Operations performed using the Local Console
128 ViBE EM4000 — Release 1.10
User Manual — 46073586AB02
Figure 5-19. Enabling a software option - insopt command 1/2
2. Enter the software
Option key
.
Figure 5-20. Enabling a software option - insopt command 2/2
The install option done message will be displayed to indicate that the
option has been installed.
You can also ensure that the option has been confirmed using the
lsopt
command (See section ’Displaying software options (lsopt)’ on
page 124).
Uninstalling a software option (rmopt)
To uninstall a software option, you will need its id . This information can
be displayed using the
lsopt
command:
Figure 5-21. Displaying option id
To uninstall a software option:
1. Type
rmopt
after the ViBE prompt:
When an installed option is edited (i.e. if the number of AAC audios
must be increased), this option will need to be uninstalled before
being reinstalled with the new key (see section below).
software option id