manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 231 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 231

 

3 

Learning Center

Basic Instrument Operations

Thermo Scientific

NanoDrop One User Guide

231

Measurement data can be exported in three formats:

• as a comma-separated values (.csv) file, containing the measurement results and details

• as a tab-separated values (.tsv) file, containing x,y coordinates for every spectral data point

• as a NanoDrop One Viewer (.sql) file, containing spectra and measurement results that 

can be imported to the 

NanoDrop One Viewer software

 running on a personal computer

The filenames are the same as the 

experiment names

. The files are stored in a folder named 

“NanodropOne” followed by the instrument serial number. (Use 

System Status

 to view 

instrument serial number.)

If you select multiple experiments for export in the CSV and TSV formats, each exported 
experiment has a corresponding CSV and TSV file. If the SQL option is also selected, the 
exported SQL file contains all the selected experiments.

Use any spreadsheet or word processing application to open a CSV or TSV file. Here is an 
example of several sample measurement results in CSV format:

The SQL file can be opened only using our NanoDrop One Viewer software, and only after 
the file has been imported.

Data can be exported to a USB device connected to any USB port on the local instrument 
(front, back-left or back-right), and then transferred to any computer that has an installed 
spreadsheet or word processing application (for CSV and TSV files) or the NanoDrop One 
Viewer application (for SQL files).

Export data at end of experiment

–

insert USB memory device into available USB port on instrument (front, back-left or 
back-right)

Note  

Data exported during a save are still saved to a database (local or remote, depending 

on the Data Storage setting; see 

Select location for saving or viewing collected data

 for 

more information).

Note  

The types of data exported are dependent upon the application used to measure the 

samples (nucleic acids in this example). For more information, see the 

application

 details.

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments