manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 241 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 241

 

3 

Learning Center

Acclaro Sample Intelligence

Thermo Scientific

NanoDrop One User Guide

241

View Acclaro Sample Intelligence Information

Measurements that include a contaminant analysis or technical information are flagged 
automatically (see examples below). Tap the icon to review the associated data or information.

The icons appear next to the 

measurement results

 (see above), and in the 

data table

, as well as 

the 

Data Viewer

 (see below).

The icons are active in all three places; the information remains with the data indefinitely, 
even after it has been exported.

Contaminant analysis is 
available for this measurement

Technical information is 
available for this measurement

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments