manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 302 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 302

Safety Information

304

NanoDrop One User Guide

Thermo Scientific

The following table lists some of the safety symbols and their indications that may appear in 
the user documentation.

Symbols

Indication

This is a mandatory action symbol. It is used to indicate that an action 
shall be taken to avoid a hazard.

This is a prohibition symbol. The graphic in this symbol is used to alert 
the user to actions that shall not be taken or shall be stopped.

This is the general warning sign. Failure to heed the safety precautions 
could result in personal injury.

Avoid shock hazard

. If you see either of these symbols, there is a risk of 

electrical shock in the vicinity. Only qualified persons shall perform the 
related procedures.

Avoid fire hazard

. Do not test flammable or explosive samples. Read and 

follow the associated instructions carefully.

Avoid eye injury

. If you see these symbols, there is a risk of exposure to 

ultraviolet light, which can harm your eyes if safety glasses are not worn.

Avoid Biohazard

. This icon informs of a biological hazard in the area. 

Read and follow the associated instructions carefully.

Avoid chemical burns

. This symbol alerts you to possible skin irritation. 

Wear gloves when handling toxic, carcinogenic, mutagenic, or corrosive 
or irritant chemicals. Use approved containers and proper procedures to 
dispose of waste.

Symbol

Description

Alternating current

Earth terminal or ground

Direct current

Protective conductor terminal

Frame or chassis terminal

Fuse

Power on

Power off

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments