Thermo NanoDrop One User Manual Download Page 35 | Manualshive

Page: 35 / 312

Thermo NanoDrop One User Manual Download Page 35

Measure Microarray

Thermo Scientific

NanoDrop One User Guide

29

Setting

Available Options

Description

Sample type and
Factor

dsDNA (with non-editable factor of
50 ng-cm/μL)

Widely accepted value for double-stranded DNA

ssDNA (with non-editable factor of
33 ng-cm/μL)

Widely accepted value for single-stranded DNA

RNA (with non-editable factor of
40 ng-cm/μL)

Widely accepted value for RNA

Oligo DNA with non-editable calculated
factor in ng-cm/μL

Factor calculated from user-defined DNA base sequence.
When selected, available DNA base units (i.e., G, A, T,
C) appear as keys. Define sequence by tapping
appropriate keys. Factor is calculated automatically based
on widely accepted value for each base unit.

Oligo RNA with non-editable calculated
factor in ng-cm/μL

Factor calculated from user-defined RNA base sequence.
When selected, available RNA base units (i.e., G, A, U,
C) appear as keys. Define sequence by tapping
appropriate keys. Factor is calculated automatically based
on widely accepted value for each base unit.

Custom (with user-specified factor in
ng-cm/μL)

Enter

between 15 ng-cm/μL and 150 ng-cm/μL

Dye 1/Dye 2 Type

a

a

To add a custom dye or edit the list of available dyes, use the Dye/Chromophore Editor.

Cy3, 5, 3.5, or 5.5,
Alexa Fluor 488, 546, 555, 594, 647, or
660

Select pre-defined dye(s) used to label sample material,
or one that has been added using Dye/Chrom. Editor.

Dye 1/Dye 2 Unit

picomoles/microliter (pmol/uL),
micromoles (uM), or millimoles (mM)

Select unit for reporting dye concentrations

Analysis
Correction

b

b

The Analysis Correction affects the calculation for nucleic acid concentration only.

On or off

Enter analysis correction wavelength in nm
or use default value (340 nm)

Corrects sample absorbance measurement for any offset
caused by light scattering particulates by subtracting
absorbance value at specified analysis correction
wavelength from absorbance value at analysis
wavelength. Corrected value is used to calculate sample
concentration.

Tip

: If the sample has a modification that absorbs light

at 340 nm, select a different correction wavelength or
turn off Analysis Correction.

«
...
33
34
35
36
37
...
»

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments