manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 168 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 168

Measure Kinetics

162

NanoDrop One User Guide

Thermo Scientific

Rate measurement screen

To see the Rate measurement screen, swipe the absorbance measurement screen (see above) to 
the left. The Rate measurement screen shows a sample’s absorbance measured at each 
user-defined wavelength over time, with time on the X-axis and absorbance on the Y-axis. 
Measurements taken at each specified wavelength are presented in a unique color. A key 
showing the monitored wavelengths and their assigned colors appears in the upper left corner 
of the screen.

Tap 

to update 

plot to show 
change in 
measured 
absorbance over 
time (see 
example below)

Swipe screen left

 to view data table; 

swipe 

right

 to return to absorbance measurement screen

Tap

 to end experiment 

and export data

User-defined wavelengths

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments