manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 219 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 219

 

3 

Learning Center

Basic Instrument Operations

Thermo Scientific

NanoDrop One User Guide

219

Auto-Measure and Auto-Blank

Speed up sample analysis with the NanoDrop One Auto-Measure and Auto-Blank features, 
which cause the instrument to start the measurement immediately after you lower the 
instrument arm. These options eliminate the need for repetitive Measure or Blank operations 
for large batches of samples.

Auto-Measure

To select or deselect Auto-Measure, from any sample measurement screen, tap the 

On

 or 

Off

 

button at the right of the Measure button.

Auto-Blank

To select or deselect Auto-Blank, from any blank measurement screen, tap the 

On

 or 

Off

 

button at the right of the Blank button.

End Experiment

Tap 

End Experiment

 when you are ready to name and save your experiment, add a label to 

help you locate the experiment later (see 

Manage identifiers on the instrument

), or 

export the 

data

.

Note  

Auto-Measure and Auto-Blank are available for micro-volume measurements only.

Note  

The 

End Experiment

 button is enabled after the first sample measurement is 

completed.

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments