manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 178 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 178

3

 Learning Center

Set Up the Instrument

178

NanoDrop One User Guide

Thermo Scientific

•

Calculations for Nucleic Acid Measurements

•

Calculations for Protein A280 Measurements

Set Up the Instrument

Connect Power

Connect the provided power cord to a grounded wall outlet. 

Tap here

 for more information.

Connect an Accessory

To connect a compatible printer or other compatible accessory such as a USB keyboard 
and/or mouse to the instrument, use any USB port on the instrument (front, back-left or 
back-right). See 

Accessories

 for information about accessories compatible with the 

NanoDrop One instruments.

Ethernet

Power on/off

Power

USB-A (2)

CAUTION  

Avoid shock hazard. Each wall outlet used must be equipped with a ground. 

The ground must be a noncurrent-carrying wire connected to earth ground at the main 
distribution box. 

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments