manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 253 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 253

 

3 

Learning Center

NanoDrop One Viewer Software

Thermo Scientific

NanoDrop One User Guide

253

•

User identifier

. Only labels assigned to experiments in the Viewer database are available. 

To list only the experiments that contain the “Good” label, for example, select 

Good

 

under the User Identifier filter (selected filter buttons are blue). To turn off the User 
Identifier filter, make sure none of the buttons are selected.

•

Time range

. To list only the experiments acquired during a particular date range (during 

the last six months, for example), select the date range from the drop down list. To turn 
off the time range filter, set it to 

All

.

Here is an example of database filtering:

Click

 to select or deselect 

application filters

Change a filter to display 
updated list of experiments

Click

 to select or deselect 

user-defined label filters

Click

 to open and 

select time range filter

Filtered list of 
experiments

Selected filter

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments