manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 269 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 269

 

3 

Learning Center

NanoDrop One Viewer Software

Thermo Scientific

NanoDrop One User Guide

269

Custom method settings

These settings are available for creating custom methods.

Setting

Available Options

Measurement range

Select spectral range in which method will acquire data.
Available options:

• Ultra-violet only (190 nm - 350 nm)

• Visible only (350 nm - 850 nm)

• Ultra-violet and visible (190 nm - 850 nm)

• Custom (specify starting and ending point in nanometers)

Notes

:

• If  a 

Baseline correction

 and/or 

Analysis wavelength correction

 are used, make sure 

your selected spectral range includes your specified baseline correction and/or 
analysis correction wavelength.

• For micro-volume absorbance measurements and measurements taken with 

nonstandard (other than 10 mm) cuvettes, the spectra are normalized to a 10 mm 
pathlength equivalent.

Analysis wavelength

Monitor absorbance at specified wavelength (enter the wavelength in nanometers).

Note

: The specified wavelength must fall within the selected 

measurement range

.

The measurement results or the concentration will be calculated automatically using 
the absorbance value at the specified wavelength and applying the selected method 
type (factor or standard curve).

Result name

Enter descriptive name for calculated concentration result (for example, “Nucleic 
Acid”) and use adjacent drop down list to select appropriate unit. Result name appears 
as column heading for reported concentration value.

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments