manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 199 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 199

 

3 

Learning Center

Measure a Micro-Volume Sample

Thermo Scientific

NanoDrop One User Guide

199

Related Topics

•

Micro-Volume Sampling—How it Works

• Absorbance Detection Limits

•

Prepare Samples and Blanks

• Auto-Measure and Auto-Blank

•

Acclaro Sample Intelligence

•

Cleaning the Pedestals

• Search  Experiment  Database

• Export Data

•

Measure a Sample Using a Cuvette

7. When you are finished measuring samples:

–

Tap 

End Experiment.

–

Enter an experiment name (tap 

Experiment Name

 

box, use displayed keyboard to type name, tap 

Done

 

key), or leave the default experiment name

–

Tap 

–

Lift the arm and clean both pedestals with a new wipe.

If finished with the instrument for the day, clean the 
pedestals with DI H2O (see 

Clean pedestals between 

users

).

Acquired data are automatically saved in an experiment with 
the entered name. In the default configuration, experiments are 
stored in a database on the local instrument according to 
acquisition date, experiment name, 

application used

 and any 

assigned labels (see 

Manage identifiers on the instrument

).

Tap to show keyboard; 
to close, tap Done key

Tap to measure 
more samples

Tap to end and 
save experiment

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments