manualshive.com logo in svg

Thermo NanoDrop One, User Manual, Page: 224 / 312

Share
Download
Thermo NanoDrop One User Manual Download Page 224

3

 Learning Center

Basic Instrument Operations

224

NanoDrop One User Guide

Thermo Scientific

Search Experiment Database

Tap 

Search

 in the Data Viewer to search the 

selected database

 for an experiment or to change 

the time range or other search filters. The database is filtered using the current settings in the 
Search box. Filters include time range, application type and any user-defined labels (see 

Manage Identifiers 

for information about adding and deleting labels). Here is an example:

Export Selected Experiments

Use 

Select

 in the Data Viewer to select experiments to be exported.

Export selected experiments

–

tap 

row

 in Data Viewer to list experiments acquired on that date, or use 

Search

 

feature to find experiment

–

insert USB memory device into available USB port on instrument (front, back-left or 
back-right)

–

tap 

Select

Tap

 to change 

time range filter

Tap

 to select or deselect 

application filters

Tap

 to select or deselect 

user-defined labels

Change a filter and tap 

OK

 to 

display updated list of experiments

Summary of Contents for NanoDrop One

























































































































































































































































































































Reviews:

No comments