Thermo Scientific Vanquish VH-P10-A-02, Operating Manual

Page: 197 / 238

8 • Troubleshooting
Vanquish Pumps (VH-P10-A-02) Operating Manual Page 197
Chromeleon Audit Trail Messages
If the device firmware detects a problem, the problem is reported to the
Chromeleon software.
The Chromeleon software logs information about all events related to
instrument operation for the current day in an Audit Trail. The Audit
Trail is named with the current date, using the format yyyymmdd. For
example, the Audit Trail for May 15, 2013, is named 20130515.
• Chromeleon 7
: The Instrument Audit Trails can be found on the
ePanel Set (Audit ePanel). In addition, Audit Trails for each
instrument are available in the Chromeleon 7 Console Data view, in
the folder of the instrument.
• Chromeleon 6.8
: The Daily Audit Trails can be found on the panel
tabset (Sequence Control panel). In addition, Daily Audit Trails are
available in the Browser, in the folder of the timebase.
Messages in the Chromeleon Audit Trail are preceded by an icon. The
icon identifies the seriousness of the problem. The table shows the icons
and explains the severity level.
Icon Severity Description
Warning • The queue (Chromeleon 7) or batch
(Chromeleon 6.8) can be started.
•
The current run is not interrupted.
Nevertheless, Thermo Fisher Scientific
recommends taking appropriate remedial action
to resolve the problem.
Error The software attempts to correct the problem.
An error does not interrupt the current analysis.
However, if the error occurs during the Ready
Check, the analysis will not be started.
or
Abort •
The queue (Chromeleon 7) or batch
(Chromeleon 6.8) cannot be started.
• A running queue or batch is stopped
immediately.
For possible causes and recommended remedial actions, see section 8.2
Messages, page 199 .