Thermo Scientific Vanquish VH-P10-A-02, Operating Manual

Page: 124 / 238

7 • Maintenance and Service
Page 124 Vanquish Pumps (VH-P10-A-02) Operating Manual
8. For 2 hours, apply the flow rate of your application and flush the
pump with fresh acetonitrile.
9. Connect the new solvent reservoirs, which contain fresh solvent.
10. Turn off the pump flow and wait until the system pressure is down
to zero.
11. Uninstall the backpressure capillary and reconnect the system as
required by your application.
12. Purge the pump.
13. Equilibrate the system.
7.4.3 Cleaning or Decontaminating the Pump
Cleaning and decontamination must be performed by qualified
personnel wearing suitable personal protective equipment. Always
observe national and local regulations.
NOTICE Wipe up all liquids spilled onto the system immediately. If
surfaces are exposed for longer periods, these liquids can cause damage.
Decontamination
Decontamination is required, for example, when leakage or spillage has
occurred, or before service or transport of the pump. Use a suitable
cleaning detergent or disinfectant to ensure that the treatment renders
the pump safe to handle.
Parts required
•
Suitable cleaning detergent (or disinfectant)
•
Purified water
•
Lint-free cloths or wipes