TK 61555-2-MM-EN
49
Figure 16.
Fuel System SLXi
1.
Relief Valve
5.
Fuel Transfer Pump
2.
Filter Head
6.
Priming Pump
3.
Bleed Screw
7.
Fuel Filter/Water Separator
4.
Mono-plunger and Distributor Injection Pump
Fuel Return Line Replacement
Use the following procedure to replace the fuel return lines and end cap.
1. Remove the clamps, the end cap, the short fuel return lines between the injection nozzles, and
the long fuel return line from the injection nozzle to the banjo fitting on the injection pump.
