![background image](http://html1.mh-extra.com/html/thermo-king/slxi-100/slxi-100_maintenance-manual_1104353095.webp)
TK 61555-2-MM-EN
95
Figure 73.
Hard Ring Positions
1.
This Side Toward Seal Plate
2.
This Side Toward Compressor
Figure 74.
Hard Ring Installation
1.
Seal Plate
2.
O-ring
3.
Hard Ring - Install with Polished Surface
Toward Compressor
4.
Hard Ring Installation Tool P/N 204-953
5.
Internal Lip Seal
12. If damaged, replace the internal lip seal by prying the old one out and press the new one into
place with the lip facing into the seal plate. Verify the lip seal is pressed all the way down into
the seal plate. Oil the lip seal with supplied compressor oil.
N
No
otte
e:: Do not replace the internal lip seal unless it is damaged.