128
TK 61555-2-MM-EN
IIm
mp
po
orrtta
an
ntt:: The cleaner must be allowed to evaporate before the next step.
Figure 106.
Fan Shaft and Housing
1.
Clean Bore with Loctite 7063 Cleaner
2.
Clean Outer Races with Loctite 7063 Cleaner
8. Apply Loctite 7240 (activator) to the machined bore (inner surface) in the evaporator end of
the housing and allow it to dry by evaporation.
Figure 107.
Fan Shaft Housing
1.
Apply Loctite 7240 (Activator) to Machined Bore (Inner
Surface)
9. Apply a bead of Loctite 603 to the leading edge of the machined bore in the evaporator end of
the housing and to the outer races of the bearings on the evaporator end of the fan shaft.
