![background image](http://html1.mh-extra.com/html/thermo-king/slxi-100/slxi-100_maintenance-manual_1104353076.webp)
76
TK 61555-2-MM-EN
3. Install the arm pivot bolt, and the eccentric plate adjustment and pivot bolts, and tighten them
finger tight.
Figure 58. Install Bolts
1.
Eccentric Plate Pivot Bolt
2.
Eccentric Plate Adjustment Bolt
3.
Arm Pivot Bolt
4. Torque the arm pivot bolt to 144 to 155 N•m (106 to 114 ft-lb). Do not tighten the eccentric
plate bolts, they will be tighten when the belt is installed.
5. Install the cross shaft/engine pulley. Position pulley axially using block P/N 2042435 between
the pulley and the cross shaft mounting bracket. This should place the pulley 16.6 mm (0.65
in.)from the end of the cross shaft housing). Tighten the pulley.
Figure 59.
Install Pulley
1.
Cross Shaft/Engine Pulley
2.
Cross Shaft Mounting Bracket
6. Install the belt following steps 10-15 of “Engine/Cross Shaft Belt Replacement” above.